Product Reviews

SmallRig Field Monitor Mount Holder Review: A Compact, Adjustable Camera Monitor Support

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review centers on a compact support for positioning a 5- or 7-inch camera monitor on a cage or handle.

Its tilt and swivel movement, cold shoe base, and adjustable tilt tension suit rigs where flexible viewing angles matter.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Field Monitor Mount Holder

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors on top of camera cages or handles.
  • Tilts up to 180 degrees and swivels 360 degrees for changing the monitor’s viewing direction.
  • Thumbscrew adjustment controls tilt tension; an included Allen wrench adjusts swivel tension.
  • Cold shoe adapter at the base connects to a camera cage or handle with a compatible shoe mount.

Pros

  • Combines broad tilt and swivel movement in a compact mount.
  • Hand-adjustable tilt tension makes quick angle changes convenient.

Consider before buying

  • The listed load capacity changes with tilt angle, so buyers need to match their setup to the applicable limit.
  • Swivel tension adjustment requires the included Allen wrench rather than a hand-turning control.
Read the full review summary

This mount combines a cold shoe connection with a 1/4-inch-20 threaded hole at the base, giving it more than one way to connect to a camera rig.

At the top, a 1/4-inch-20 screw supports a monitor or compatible accessory, while locating pins and a silicone pad are designed to help resist twisting and surface scratches.

Its 180-degree tilt and 360-degree swivel make it useful for changing a monitor’s viewing direction without rebuilding the rig.

Buyers should pay attention to the stated load limits at different tilt angles and retighten the knurled screw with the included Allen wrench for added security.

It is best suited to compact camera setups that benefit from direct mounting and frequent angle adjustment.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle adjustment

The mount tilts up to 180 degrees and swivels 360 degrees, giving operators broad positioning options.

8/10

Mounting flexibility

A cold shoe base, a threaded base hole, and a top screw accommodate several common rig connections and accessories.

8/10

Monitor fit

It is designed for 5- and 7-inch monitors, with locating pins intended to help secure compatible models such as the Ninja V and V+.

8/10

Tension control

Tilt tension can be adjusted quickly by hand, while swivel tension is adjusted with the supplied Allen wrench.

7/10

Load guidance

Angle-specific limits are provided, but buyers need to check the relevant limit for the way they plan to position a monitor.

8/10

Compactness

At 76 grams with a folded size of 78 by 67 by 42 millimeters, it is a small addition to a camera rig.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed to support 5- and 7-inch camera monitors on top of camera cages or handles.
  • Tilts up to 180 degrees and swivels 360 degrees for changing the monitor’s viewing direction.
  • Thumbscrew adjustment controls tilt tension; an included Allen wrench adjusts swivel tension.
  • Cold shoe adapter at the base connects to a camera cage or handle with a compatible shoe mount.
  • Base also includes a 1/4-inch-20 threaded hole for a magic arm or stabilizer connection.
  • Top 1/4-inch-20 screw can support a monitor, microphone, light, or other compatible accessory.
  • Built-in locating pins and a silicone pad are designed to help secure compatible monitors and prevent surface scratches.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Combines broad tilt and swivel movement in a compact mount.
  • Hand-adjustable tilt tension makes quick angle changes convenient.
  • Offers both a cold shoe base and a threaded base connection.
  • Locating pins and a silicone pad add contact points intended to steady and protect the monitor.

Consider before buying

  • The listed load capacity changes with tilt angle, so buyers need to match their setup to the applicable limit.
  • Swivel tension adjustment requires the included Allen wrench rather than a hand-turning control.
  • The knurled screw needs to be retightened with the wrench for added security, which adds a step during setup.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider this mount if your rig uses a 5- or 7-inch monitor and you want to adjust its viewing direction without adding a longer arm.

Its compact form and direct cold shoe connection make it a practical fit for a cage or handle with a compatible shoe mount.

It is also worth considering if your setup may benefit from the threaded base option or if you want to mount another compatible accessory using the top screw.

Before buying, check the connection points on your rig and compare your monitor’s weight and intended tilt angle with the specified load limits.

Who should skip it

Skip this design if your rig does not provide a compatible cold shoe or threaded connection and you do not have a suitable adapter.

Also consider another mounting arrangement if your preferred monitor position or weight falls outside the mount’s angle-specific limits.

How the SmallRig Monitor Mount Fits a Camera Rig

Direct positioning for field monitors

The mount is intended for 5- and 7-inch monitors, with a top 1/4-inch-20 screw and locating pins that can suit compatible monitor housings.

Its short, direct mounting approach keeps the monitor close to the cage or handle, which may appeal to operators who want an adjustable screen without an extended arm.

Angle range and tension

Tilt and swivel serve different positioning needs: the 180-degree tilt changes the screen’s up-and-down angle, while the 360-degree swivel turns it around the mount.

Tilt tension is adjusted with a thumbscrew; swivel tension uses the supplied Allen wrench, so the two movements have different adjustment routines.

Respecting the angle-specific limits

The stated load capacity varies by tilt: below 9.3 pounds at 90 degrees, below 5.5 pounds at 45 degrees, and below 5 pounds at 30 degrees.

Buyers should use the limit corresponding to their planned position, then retighten the knurled screw with the wrench as directed for added security.

Choosing a connection point

A cold shoe adapter at the bottom allows attachment to a compatible cage or handle, while a 1/4-inch-20 threaded base hole provides another connection option for a magic arm or stabilizer.

Check the rig’s available mount and the accessory’s connection before choosing this holder.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SMALLRIG Camera Monitor Mount 6313
4.7/5

800+ ratings

Read Amazon Reviews

SMALLRIG Camera Monitor Mount 6313

Compare the 6313 if portrait or landscape installation is important to your setup, since that capability is specifically described for it.

The Field Monitor Mount Holder may suit buyers who want its stated angle-specific load guidance and a threaded base hole for a magic arm or stabilizer.

  • The 6313 mount also provides 180-degree tilt, 360-degree pan, and a cold shoe base, with a retractable 1/4-inch-20 locating screw and support for horizontal or vertical monitor installation.
  • Its tilt damping is adjusted by thumb knob.
  • The SmallRig Field Monitor Mount Holder offers a cold shoe base, a 1/4-inch-20 threaded base hole, angle-adjustable tilt and swivel, and listed load limits that vary with tilt.

Camera Mounts & Clamps alternative

SMALLRIG Ballhead Clamp Double Ball Adapter 2164
4.6/5

1,000+ ratings

Read Amazon Reviews

SMALLRIG Ballhead Clamp Double Ball Adapter 2164

Choose the 2164 if clamping directly onto a compatible rod or tube is more useful than attaching through a cold shoe or threaded base.

The Field Monitor Mount Holder is the more direct option when the rig already has a suitable shoe or threaded connection and the intended screen is 5 or 7 inches.

  • The 2164 uses a bottom clamp that can attach to rods or tubes up to 40 millimeters in diameter, plus a top 1/4-inch screw for a monitor or light.
  • It has 360-degree articulation and a single locking knob.
  • The Field Monitor Mount Holder uses a cold shoe or threaded base connection and is designed for 5- or 7-inch monitors, with tilt and swivel adjustments.

Is SmallRig Monitor Mount Worth It?

The SmallRig Field Monitor Mount Holder is worth considering for compact rigs that need an adjustable position for a 5- or 7-inch monitor.

Its tilt and swivel range, hand-adjustable tilt tension, and two base connection options make it a flexible small mount.

Check your rig’s mounting point and your monitor’s weight against the angle-specific limits before choosing it.

Buyers who need direct rod or tube clamping, or portrait and landscape mounting explicitly supported, should compare the alternatives’ connection and orientation features.

Your review at a glance

SmallRig Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Field Monitor Mount Holder

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors on top of camera cages or handles.
  • Tilts up to 180 degrees and swivels 360 degrees for changing the monitor’s viewing direction.
  • Thumbscrew adjustment controls tilt tension; an included Allen wrench adjusts swivel tension.
  • Cold shoe adapter at the base connects to a camera cage or handle with a compatible shoe mount.

Written by

avatargenerator.org Editorial Team

Editorial team

avatargenerator.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Field Monitor Mount Holder

SmallRig Field Monitor Mount Holder

A compact mount for camera operators who want adjustable positioning for a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors on top of camera cages or handles.
  • Tilts up to 180 degrees and swivels 360 degrees for changing the monitor’s viewing direction.
Check Video Reviews on Amazon