The best camera mounts depend on what you need to attach and where your setup needs to sit, from a monitor on a cage to a camera over a desk. These picks cover adjustable clamps, dedicated monitor holders, camera cages and rod hardware so you can match the mount to your gear and shooting style.
Quick Top Products
SmallRig Cool Ballhead Arm 1138
- Super clamp and action camera mount adapter are included.
- Supports up to 1.5 kg.
- Clamps to rods, tubes, tables and frames.
Best For: Creators who need to clamp a camera or accessory to a table, tube or frame.
SmallRig 9.8-Inch Magic Arm Clamp Kit
- The articulating arm is 9.8 inches long.
- The clamp opens from 15 mm to 54 mm.
- The kit includes a super clamp and articulating magic arm.
Best For: Filmmakers who need to position a monitor, light or microphone away from a clamped support point.
SmallRig Field Monitor Mount BSE2346
- Designed for 5- and 7-inch monitors.
- Offers 360-degree swivel and 140-degree tilt.
- Supports monitors up to 1.2 kg.
Best For: Camera operators mounting a 5- or 7-inch field monitor on a cold shoe.
SmallRig Adjustable Monitor Mount 6314
- Supports horizontal and vertical monitor installation.
- Provides 360-degree pan and 180-degree tilt.
- Uses a 3/8-16 ARRI locating screw at the bottom.
Best For: Video shooters mounting a monitor vertically or horizontally on an ARRI locating point.
SmallRig Adjustable ARRI Monitor Mount
- Made for 5- and 7-inch monitors.
- Swivels 360 degrees and tilts 180 degrees.
- The upper locating pins help resist twisting.
Best For: Filmmakers who need a hand-tightened ARRI-style holder for a 5- or 7-inch monitor.
SmallRig ARRI Monitor Mount 2174
- Fits 5- or 7-inch monitors up to 1.5 kg.
- The monitor position adjusts through up to 146 degrees.
- A thumbscrew enables tool-free installation.
Best For: Operators who want a monitor holder that attaches to an ARRI locating hole on a cage or handle.
SmallRig Super Clamp with 1/4- and 3/8-Inch Threads
- The jaw fits surfaces from 15 mm to 40 mm thick.
- Has 1/4-inch and 3/8-inch threaded holes.
- Rubber pads help prevent slipping and scratches.
Best For: Camera rig builders who need a compact clamp for a rod, shelf or bar and will attach a compatible accessory separately.
SmallRig 11-Inch Magic Arm Clamp 5311
- The arm measures 11 inches and includes a crab-shaped clamp.
- The 1/4-20 end has retractable pins to resist twisting.
- Maximum payload is 1.5 kg.
Best For: Action camera and monitor users who want a longer clamp arm with retractable locating pins.
SmallRig 7-Inch Magic Arm Clamp 5310
- The 7-inch arm has retractable pins and a 1/4-20 screw.
- The clamp fits support diameters from 15 mm to 40 mm.
- Maximum payload is 1.5 kg.
Best For: Creators who want a clamp and anti-twist connection in a compact arm.
SmallRig 15- to 35-Inch Desk Clamp Stand
- Uses a desk clamp and three-section extension pole.
- The notes give an adjustable height range of 19 to 39 inches.
- Maximum load capacity is 3 kg.
Best For: Streamers, interviewers and tabletop shooters who need a camera or light positioned above a desk.
Flexible Clamp and Ballhead Kit
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The SmallRig 1138 combines a super clamp with a double ballhead adapter, giving you a flexible position for a camera or another piece of rigging gear. Its 1/4-inch screw and included action camera adapter broaden what you can attach, while the locking knob secures the clamp to a rod, tube, table or frame.
The clamp supports up to 1.5 kg, so check the combined weight of the camera and any attached accessories before mounting. Aluminum and stainless steel construction keeps the kit compact.
For dynamic shooting, use a safety rope as advised for this setup.
Best For: Creators who need to clamp a camera or accessory to a table, tube or frame.
| Pros | Cons |
|---|---|
|
|
Choose this kit when you want one clamp to handle several mounting surfaces and need an adapter for an action camera. The 1.5 kg limit makes it important to check the weight of the full mounted setup, especially if adding a monitor, light or microphone.
The double ballhead helps with positioning, while the locking knob anchors the clamp to the support. For a dedicated monitor holder or a camera-specific cage, another pick here gives a more focused fit.
Long Reach with a Clamping Arm
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This kit pairs a 9.8-inch articulating arm with a super clamp, giving you reach between a support surface and a small accessory. The arm has 1/4-inch screws at both ends, and the clamp provides 1/4-inch and 3/8-inch threads.
Its jaws open from 15 mm to 54 mm, which helps when attaching the kit to different bars or edges. Double ballheads rotate 360 degrees for angle adjustment.
Rubber cushions protect contact surfaces and help the clamp and arm hold accessories more securely. This is a practical rigging choice when a direct camera shoe mount does not offer enough positioning freedom.
Best For: Filmmakers who need to position a monitor, light or microphone away from a clamped support point.
| Pros | Cons |
|---|---|
|
|
Pick this arm when the mounting point and the accessory need to sit apart, such as when placing a monitor near a camera rig or a light beside a support bar. The 9.8-inch arm and 360-degree joints prioritize positioning flexibility.
Confirm that the clamp can fit your bar or surface within its 15 mm to 54 mm jaw range. The product notes do not give a load capacity, so check suitability for the weight of your intended accessory before mounting.
Cold Shoe Monitor Holder
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
The BSE2346 is a dedicated holder for 5- and 7-inch field monitors. Its cold shoe attaches the mount to the top of a camera or another compatible system, while a bottom 1/4-20 screw connects the monitor.
The holder swivels 360 degrees horizontally and tilts 140 degrees vertically to help place the screen at a useful viewing angle. Rubber cushions add friction at the monitor contact point and help guard against scratches.
It supports monitors weighing up to 1.2 kg. The package includes a hex spanner, and the thumbscrew is designed for manual adjustment.
Best For: Camera operators mounting a 5- or 7-inch field monitor on a cold shoe.
| Pros | Cons |
|---|---|
|
|
This holder is a straightforward option for a small field monitor when your camera or rig has a cold shoe available. Its 360-degree swivel and 140-degree tilt cover a wide range of viewing positions, and the 1.2 kg limit gives a clear load figure to check against your screen.
The mount is purpose-built for monitors, so it is a better match than a general clamp when the screen size and shoe connection fit your setup. Confirm your monitor's weight and attachment point before choosing it.
ARRI Mount for Landscape or Portrait Monitoring
SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting
SmallRig's 6314 is designed for monitors and accessories with a 1/4-20 threaded hole or locating hole, with a 3/8-16 ARRI locating screw at the bottom for attaching to a compatible cage or handle. The top has a retractable 1/4-20 locating screw and locating pins to help resist monitor twisting.
Its 360-degree pan and 180-degree tilt support landscape and portrait positioning. A thumb knob adjusts tilt damping for devices of different weights, and an included L-shaped Allen wrench provides additional tightening.
Check that your support has the matching ARRI locating point and that your monitor accepts the top connection.
Best For: Video shooters mounting a monitor vertically or horizontally on an ARRI locating point.
| Pros | Cons |
|---|---|
|
|
Choose the 6314 if portrait framing is part of your workflow and your cage or handle has a 3/8-16 ARRI locating point. Its full pan and tilt range offers flexible screen placement, while the anti-twist features suit monitors that need a more secure connection.
The product notes do not give a maximum load, so verify the mount's suitability for your monitor before buying. A cold shoe mount may be simpler if your camera lacks ARRI locating hardware.
ARRI-Style Mount for 5- and 7-Inch Monitors
SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360° Swivel and 180° Tilt Monitor Holder Anti-Twist Support 5” and 7” Field Monitor
This adjustable holder supports 5- and 7-inch field monitors and attaches through an ARRI locating connection at the bottom. The upper 1/4-20 screw and locating pins help resist monitor twisting, while a silicone pad protects the contact surface.
A knob lets you set the angle without relying on an Allen wrench for routine adjustment. The mount swivels 360 degrees and tilts 180 degrees.
Its load capacity varies with tilt angle, so consider both monitor weight and intended position before choosing it. The mount also has 1/4-20 threaded holes for compatible accessories such as a magic arm or stabilizer.
Best For: Filmmakers who need a hand-tightened ARRI-style holder for a 5- or 7-inch monitor.
| Pros | Cons |
|---|---|
|
|
This is a good fit if your rig uses an ARRI-style locating point and you want quick hand adjustment for a 5- or 7-inch monitor. The mount provides a broad pan and tilt range, but its supported load changes with the angle: the product notes give different limits for 90-, 45- and 30-degree positions.
Check those angle-specific limits against your monitor and intended framing. If you need a known maximum without angle-dependent figures, compare the dedicated cold shoe holder.
One-Hand Monitor Positioning
SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174
The 2174 mounts a 5- or 7-inch monitor to a cage or handle through a 3/8-inch threaded hole for ARRI standard. A single rotation axis adjusts the monitor through as much as 146 degrees, and a thumbscrew supports tool-free attachment.
The mount supports monitors up to 1.5 kg. If your cage lacks ARRI locating holes, the product notes identify an optional mini plate as an alternative connection route using two 1/4-inch threaded holes.
This model suits rigs built around ARRI points, but compatibility with the mounting surface matters as much as monitor size.
Best For: Operators who want a monitor holder that attaches to an ARRI locating hole on a cage or handle.
| Pros | Cons |
|---|---|
|
|
Choose this holder if you need a clear monitor size and weight range and your rig has an ARRI locating hole. Its 146-degree adjustment is less expansive than some full-pan designs, but a single axis and hand-tightened connection keep positioning simple.
If your cage lacks locating holes, account for the optional mini plate and its two 1/4-inch threaded connections. Check the monitor's size and weight, then confirm your cage or handle's attachment standard.
Compact Clamp for Common Rig Threads
SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas
This standalone super clamp attaches to surfaces between 15 mm and 40 mm thick, with a jaw opening of up to 40 mm. It includes 1/4-inch and 3/8-inch threaded holes for adding compatible accessories such as a ballhead or magic arm.
Rubber pads help protect the clamped surface and reduce slipping. Because the package contains the clamp alone, you will need a separate adapter or arm if your camera cannot connect directly to its threads.
Its compact form is useful for building a custom rig around a particular mounting point, but check the support dimensions and accessory connection before ordering.
Best For: Camera rig builders who need a compact clamp for a rod, shelf or bar and will attach a compatible accessory separately.
| Pros | Cons |
|---|---|
|
|
Pick this clamp if you already have an adapter or want to assemble a rig from separate parts. Its 1/4-inch and 3/8-inch threads give you mounting options, and the jaw range covers many rods, shelves and bars.
The key tradeoff is that it is only the clamp; budgeting and compatibility depend on the adapter you pair with it. Measure the support surface and confirm the attachment thread before relying on it for a camera or accessory.
Anti-Twist Clamp Arm for Action Cameras
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 combines an 11-inch magic arm with a crab-shaped clamp and a 1/4-20 screw with retractable pins at one end. The pins help resist twisting when paired with compatible action camera cages, and the clamp fits tubes, tables, tripod legs or stabilizer rings from 15 mm to 40 mm in diameter.
A wingnut loosens the joints together for repositioning, then tightens them in place. The stated maximum payload is 1.5 kg.
It includes an Allen wrench for extra tightening. Match both the clamp diameter and your device's connection before using the arm.
Best For: Action camera and monitor users who want a longer clamp arm with retractable locating pins.
| Pros | Cons |
|---|---|
|
|
Choose this longer arm when your subject or monitor needs more reach from a tube, table edge or tripod leg. Its retractable pins suit compatible action camera cages, while the single wingnut adjusts the ball joints together.
Keep the combined load within 1.5 kg and verify that the support falls within the clamp's 15-to-40 mm diameter range. For a compact direct-to-shoe monitor mount, a dedicated holder may take less space.
Shorter Reach Anti-Twist Arm
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The 5310 pairs a 7-inch magic arm with a crab-shaped clamp, a 1/4-20 screw and retractable pins. The pins help prevent compatible devices from twisting at the connection, and an included Allen wrench can reinforce tightening.
The clamp fits tubes, tables, tripod legs and stabilizer rings from 15 mm to 40 mm in diameter. A wingnut loosens the joints together for repositioning.
The maximum payload is 1.5 kg, so this is intended for smaller camera accessories within that limit. The shorter arm can suit tighter rigs where a longer extension would be awkward.
Best For: Creators who want a clamp and anti-twist connection in a compact arm.
| Pros | Cons |
|---|---|
|
|
This 7-inch arm suits setups where a camera accessory needs flexible placement. It has a 1.5 kg maximum payload and a 15-to-40 mm clamp range, so check both before mounting.
The retractable pins are useful with compatible action camera cages, and the wingnut simplifies repositioning. Tightening the wingnut locks the ball joints in place.
Height-Adjustable Desk Camera Stand
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
This desk-mounted stand combines a C-clamp, three-section extension pole and 1/4-inch ballhead for positioning a camera, phone or ring light above a table. The detailed notes give a height range of 19 to 39 inches with the ballhead and clamp, and the clamp fits tables up to 1.85 inches thick.
The ballhead rotates 360 degrees and tilts from -90 to +45 degrees. It supports up to 3 kg and weighs 430 g.
The product title uses a different height range, so verify the dimensions and available desk clearance for the specific configuration before buying.
Best For: Streamers, interviewers and tabletop shooters who need a camera or light positioned above a desk.
| Pros | Cons |
|---|---|
|
|
Choose this stand for desk-based streaming, interviews or overhead camera placement when a floor tripod would take up space. The telescoping pole and ballhead give height and angle adjustments, while the 3 kg capacity covers the camera or light only if the complete setup stays within that limit.
Check desk thickness and clearance. The product title and detailed height range do not agree, so confirm the usable height for the configuration you plan to mount.
How to Choose Camera Mounts
How We Picked Camera Mounts
We prioritized products that physically position a camera or a common camera accessory on a support, cage, shoe or desk. The selection spans general clamps, articulated arms, monitor holders and a desk stand because each solves a different mounting task.
We left out camera handles, power-bank holders, rod blocks and model-specific cages where their main job is rig handling, battery support or enclosure rather than general mounting.
Compatibility and fit matter as much as the mount's shape. Compare the connection standard on the mount with the camera, cage, monitor or accessory you plan to attach, then check jaw ranges, supported monitor sizes and stated load limits where provided.
A mount with flexible joints still has to fit both ends of your setup.
Comparing Camera Mounts and Clamp Arms
A standalone clamp such as the SmallRig super clamp works when you already own a compatible arm or ballhead. Kits such as the 1138 and the 9.8-inch arm include positioning hardware, while the 5310 and 5311 combine a clamp with an anti-twist connection and a specified payload.
The longer 5311 reaches farther; the 5310 is more compact. Check the clamp's jaw or diameter range against the exact support point, since the products use different fit ranges.
Monitor mounts trade general-purpose flexibility for a more specific screen connection. The BSE2346 attaches by cold shoe and gives a defined supported screen size and load.
The ARRI models require compatible locating hardware and vary in tilt range, adjustment design and stated load information. If your cage already has a matching locating point, these can give cleaner integration than adding a separate clamp.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig Cool Ballhead Arm 1138Check Price |
| Creators who need to clamp a camera or accessory to a table, tube or frame. |
| SmallRig 9.8-Inch Magic Arm Clamp KitCheck Price |
| Filmmakers who need to position a monitor, light or microphone away from a clamped support point. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Camera operators mounting a 5- or 7-inch field monitor on a cold shoe. |
| SmallRig Adjustable Monitor Mount 6314Check Price |
| Video shooters mounting a monitor vertically or horizontally on an ARRI locating point. |
| SmallRig Adjustable ARRI Monitor MountCheck Price |
| Filmmakers who need a hand-tightened ARRI-style holder for a 5- or 7-inch monitor. |
| SmallRig ARRI Monitor Mount 2174Check Price |
| Operators who want a monitor holder that attaches to an ARRI locating hole on a cage or handle. |
| SmallRig Super Clamp with 1/4- and 3/8-Inch ThreadsCheck Price |
| Camera rig builders who need a compact clamp for a rod, shelf or bar and will attach a compatible accessory separately. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Action camera and monitor users who want a longer clamp arm with retractable locating pins. |
| SmallRig 7-Inch Magic Arm Clamp 5310Check Price |
| Creators who want a clamp and anti-twist connection in a compact arm. |
| SmallRig 15- to 35-Inch Desk Clamp StandCheck Price |
| Streamers, interviewers and tabletop shooters who need a camera or light positioned above a desk. |
Choosing a Desk Camera Mount
A C-clamp desk stand is useful for streaming, interviews or tabletop shooting when you want the camera above a work surface. Check desk thickness, available vertical clearance and the ballhead's tilt direction before choosing one.
The included stand's title and detailed notes give different height ranges, so confirm the configuration's working height. Also account for the weight of the camera, lens and any attached accessories against the 3 kg capacity.
For a clamp arm, consider reach and joint adjustment. A longer arm can move a monitor or light away from the support, but it may occupy more space and create more leverage.
Keep the mounted accessory within the stated payload and tighten the joints with the intended knob or wrench. For motion use, follow any safety directions given for the specific mount and avoid assuming that a static load figure applies while moving.
Which Camera Mount Fits Your Setup?
For a field monitor on a cold shoe, the BSE2346 offers broad swivel and tilt with a stated 1.2 kg limit. For a rig with ARRI locating points, compare the 2174's defined 1.5 kg capacity with the 6314's portrait and landscape positioning and the adjustable ARRI-style model's angle-dependent load limits.
Choose a 5310 or 5311 when you need a clamp arm with anti-twist hardware for compatible gear, selecting the length that suits your placement. Pick the 1138 for a compact general clamp kit, the 9.8-inch kit when extra reach matters, or the standalone super clamp if you already have separate adapters.
For desk filming, use the C-clamp stand after checking table thickness, height and total load.